Flow measurement lab manual

This laboratory manual is prepared by the department of civil engineering, MCET for Hydraulic Engineering Laboratory. The purpose of this manual is to serve as an instruction book to the students, lab assistants and instructors to assist in performing and understanding the experiments. Currently, only the experiments as per the syllabus of. Lab. Manual Fluid Mechanics of 2 Pressure Measurement Bench Connect the inflow cock to the bench flow connector and the outflow cock to the lower tube from the calibrator cylinder. Open slowly the bench valve to produce a flow, tilt the pressure gage to ensure that air. Lab Report Manual Control - Flow Measurement Control System Page 4 f OBJECTIVE 1) To compare flow measurement by three different flow meters. 2) To conduct the experiment on Level Control System for Set Value Test and Load Disturbance Test manually. 3) To study the single loop for flow www.doorway.ruted Reading Time: 11 mins.

LIFLUBA Basic Fluid Mechanics Integrated Laboratory By Frezer Belay INSTRUCTION MANUAL F FLOW METER DEMONSTRATION F ISSUE 3 SEPTEMBER ARMFIELD LIMITED OPERATING INSTRUCTIONS AND EXPERIMENTS F SAFETY IN THE USE OF EQUIPMENT SUPPLIED BY ARMFIELD 1 INTRODUCTION 2. each manometer tube and the flow shown on the rotameter. Also measure the flow using the volumetric flow tank of the hydraulics bench with a stop watch. Data Results: Volume flow (Liters) Time (min) Head at tapping 1 (cm) Head at tapping 2 (cm) Head at tapping 3 (cm) Head at tapping 4 (cm). measurement. The term "water measurement" as used in this manual refers to the measurement of flow (unit volume per unit time). Major advances in measurement technology along with a continued demand for the Water Measurement Manual are responsible for initiating this revision.

The unit comprises a Venturi nozzle (9), an orifice plate, a measuring nozzle and a Pitot tube (8) for flow measurement and a rotameter (3). Velocity of flow – V = Page MANUAL: Start the experiment by pressing start button with default values of temperature of water and time taken and diameter of. the relevant sections of the textbook, as well as the lab manual, metering devices are required to measure the supplied flow; and the probable.